If provided, we'll verify fitment before your order ships and contact you if the selected part is incompatible. Enter your VIN, then add the product to your cart.
Product details
Part NameVVT Solenoid
BrandWalker Products
Part Number590-1008
UPC00724620111570
Estimate Delivery Date
Have Questions?
Ask our experts via Live Chat at the bottom right corner of this page.
If your vehicle is listed on the fitment table below, the product will fit your car - we guarantee it. All you need to do is to ensure that the vehicle's Year, Make, Model, Trim, and any other notes specified inside the fitment table are respected.
Walker Products Engine Variable Valve Timing (VVT) Solenoids are OE Replacement components designed to restore dynamic camshaft control in modern engine platforms. The VVT solenoid controls the flow of pressurized oil to the cam phaser or VVT sprocket, adjusting valve timing based on real-time driving conditions. This system improves fuel efficiency, throttle response, and emissions by altering valve opening angles under various engine loads and speeds. Over time, solenoids can become clogged, stick open or closed, or fail electrically—triggering fault codes (e.g., P0010–P0014, P0020–P0024), rough idle, hesitation, or reduced power. Walker VVT Solenoids are engineered to meet or exceed OE specifications for electrical response, oil flow control, and pressure regulation. Each unit is manufactured with heat-resistant plastic housings, precision-machined internal valves, and oil-sealed connectors to ensure long-term reliability under constant engine operation. Designed for an exact OE fit, Walker VVT Solenoids install quickly using factory wiring and hardware. Whether resolving a timing-related drivability issue or performing routine maintenance, these solenoids help restore factory-level performance, improve combustion efficiency, and support emissions system compliance.
Characteristics include:
Controls Camshaft Timing: Actuates oil flow to VVT sprockets, allowing optimized valve timing for power, fuel economy, and emissions.
OE Replacement Calibration: Matches original electrical specs, oil flow rate, and response timing for precise engine control.
Built for Harsh Environments: Constructed with oil-resistant seals and heat-tolerant housings to withstand long-term engine operation.
Exact OE Fit: Installs using factory connectors and mounting points with 100% fit—no modification required.
Resolves Timing-Related Issues: Helps eliminate check engine lights, poor idle, or drivability problems caused by sticking or failed solenoids.
Watch genuine customer videos showing their upgrades and honest results of similar products
Fitment Table
This product is compatible with these vehicles:
Year
Make
Model
Notes
Position
2015
Ford
Escape
2.5L
Inline engine
4 cylinders
3.50" bore
3.94" stroke
2014
Ford
Escape
2.5L
Inline engine
4 cylinders
3.50" bore
3.94" stroke
2013
Ford
Escape
2.5L
Inline engine
4 cylinders
3.50" bore
3.94" stroke
2012
Ford
Escape
2.5L
Inline engine
4 cylinders
3.50" bore
3.94" stroke
2012
Ford
Fusion
2.5L
Inline engine
4 cylinders
3.50" bore
3.94" stroke
2012
Lincoln
MKZ
2.5L
Inline engine
4 cylinders
3.50" bore
3.94" stroke
2011
Ford
Escape
2.5L
Inline engine
4 cylinders
3.50" bore
3.94" stroke
2011
Ford
Fusion
2.5L
Inline engine
4 cylinders
3.50" bore
3.94" stroke
2011
Lincoln
MKZ
2.5L
Inline engine
4 cylinders
3.50" bore
3.94" stroke
2011
Mercury
Mariner
2.5L
Inline engine
4 cylinders
3.50" bore
3.94" stroke
2011
Mercury
Milan
2.5L
Inline engine
4 cylinders
3.50" bore
3.94" stroke
2010
Ford
Escape
2.5L
Inline engine
4 cylinders
3.50" bore
3.94" stroke
2010
Ford
Fusion
2.5L
Inline engine
4 cylinders
3.50" bore
3.94" stroke
2010
Mercury
Mariner
2.5L
Inline engine
4 cylinders
3.50" bore
3.94" stroke
2010
Mercury
Milan
2.5L
Inline engine
4 cylinders
3.50" bore
3.94" stroke
2009
Ford
Escape
2.5L
Inline engine
4 cylinders
3.50" bore
3.94" stroke
2009
Ford
Fusion
2.3L
Inline engine
4 cylinders
3.44" bore
3.70" stroke
2009
Mercury
Mariner
2.5L
Inline engine
4 cylinders
3.50" bore
3.94" stroke
2009
Mercury
Milan
2.3L
Inline engine
4 cylinders
3.44" bore
3.70" stroke
2008
Ford
Fusion
2.3L
Inline engine
4 cylinders
3.44" bore
3.70" stroke
2008
Mercury
Milan
2.3L
Inline engine
4 cylinders
3.44" bore
3.70" stroke
2007
Ford
Fusion
2.3L
Inline engine
4 cylinders
3.44" bore
3.70" stroke
2007
Mercury
Milan
2.3L
Inline engine
4 cylinders
3.44" bore
3.70" stroke
2006
Ford
Fusion
2.3L
Inline engine
4 cylinders
3.44" bore
3.70" stroke
2006
Mercury
Milan
2.3L
Inline engine
4 cylinders
3.44" bore
3.70" stroke
See what other customers say:
Customer Reviews
Overall rating: 4.9 / 5 from 594 reviews.
I love PartsPioneer. The rear-wheel Positive Plus pads and Genius rotors fit perfectly on my 2019 Subaru Forester. Excellent quality at a fair price. Highly recommended.
Thanks for catching an error in my order and righting it for me, complete with email to say so! This … is what customer service head and shoulders above, looks like !! Well done all !!
Service was great, appreciated the phone call to confirm the vehicle. Parts arrived quick. OEM fit. Will be ordering brakes as you can see by the picture. Very impressed.
I have bought this rotor on part pioneer for my Q3 and installed and used for over a week, they are amazing no squeaks no noises brakes have improved 110%. This rotors are the best so far I’ve always bought rotors and used in all three of my cars and so far these ones are the best that I have ever bought.
Thanks
Renato
Awesome parts, for a great deal, and the customer service is second to none, always willing to help, and they double check fitment to ensure you always get the right parts! Will definitely be ordering again.